SURFACE MODIFICATIONS OF EN 8 STEEL WITH APPLICATION OF VARIOUS CUTTING FLUIDS DURING MACHINING PROCESS

Bushra Shimrose, B.Satish Kumar, N. Gopikrishna

Abstract


Turning process, a machining process used in a manufacturing industry. Process of turning is influenced by known factors such as cutting velocity, depth of cut, feed rate, geometry of cutting tool, & cutting conditions etc. In the machining operations, achieving the desired surface quality of a machined product is really challenging job. This is due to the fact that quality is highly influenced by process parameters directly or indirectly. However, the extent of a significant influence of process parameters those are different for different responses. In this thesis the effect of insert nose radius and the machining parameters which including the cutting speed, feed rate and cutting fluids on surface roughness in a turning operation are investigated by using the Taguchi optimization method. 3D modeling done by PRO ENGINEER parametric software. Analysis is done by ANSYS.


Keywords


CNC Turing; Surface Finish; Taguchi Optimisation;

References


. Optimization of gadget parameters of CNC Milling device for moderate metal using Taguchi layout and Single to Noise ratio Analysis ANIL CHOUBEY1, VEDANSH CHATURVEDI2 ,JYOTI VIMAL.

. Optimization of Input Process Parameters in CNC Milling Machine of EN24 Steel 1Balinder Singh, 2Rajesh Khanna, 3Kapil Goyal, 4Pawan Kumar

. N. Gopikrishna and M. ShivaChander Determining the Influence of Cutting Fluid on Surface Roughness during Machining of EN24 and EN8 steel by using CNC Milling Machine, Journal for Research| Volume 01| Issue 11 | January 2016 ISSN: 2395 – 7549 pp 1 – 4

. Selection of Optimum Process Parameters in High Speed CNC End-Milling of Composite Materials Using Meta Heuristic Techniques – a Comparative Study Pare, V., Geeta, G., Krishna, C.M. Vikas Pare – Geeta Agnihotri – Chimata Krishna*

. B. Satish Kumar and N. Gopkrishna optimization of turning process parameters, on EN 9 carbon steel using grey relational analysis – International Journal of innovations in engineering research and technology| Volume 4| Issue 1 | January 2017 ISSN: 2394 – 3696, pp 6 – 10

. G. Petropoulos, I. Ntziantzias, C. Anghel, A predictive model of slicing forces in milling the usage of Taguchi & response floor strategies, a proceeding of 1st InternationalConferenceonExperiments/Process/SystemModelling/Simulation/Optimization, Athens, 6- 9 July, 2005

. C. Tsao, Grey–Taguchi technique to optimize the milling parameters of aluminum alloy, International Journal on Advanced Manufacturing Technology (2009) 40:41–48


Full Text: PDF

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright © 2012 - 2023, All rights reserved.| ijitr.com

Creative Commons License
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.