Email this article 
Hide
Show allA NIMBLE-WITTED DEFENSIVE CAP FOR EXCAVATORS
Abstract
A nimble-witted defensive top has been made that can perceive of dangerous juncture in the excavation business. In the progression of defensive top, we have considered the three major sorts of danger, for instance, air quality, head defender ejection, and crash. The first is the obsession level of the hazardous gasses, for instance, Carbon monoxide, sulfur dioxide, nitrogen dioxide, and rugged issue. The second hazardous juncture was named a digger clearing thee digging defensive top off their head. An IR sensor is made unsuccessfully however an off-the rack IR sensor is then used to victoriously choose when the defensive top is on the excavator’s head. The third unsafe juncture is described as an juncture where excavators are smacked by a challenge against the head with a power.
Keywords
References
M. A. Hermanus, “Occupational health and safety in mining—status, new developments, and concerns,” The Journal of The Southern African Institute of Mining and Metallurgy, vol. 107, pp. 531-538, Aug. 2007.
A.P. Squelch, “Virtual reality for mine safety training in South Africa,” The Journal of The South African Institute of Mining and Metallurgy, pp. 209-216, July 2001.
C. Qiang, S. Ji-ping, Z. Zhe and Z. Fan, “ZigBee Based Intelligent Helmet for Coal Miners,” IEEE World Congress on Computer Science and Information Engineering (WRI 2009), 31 Mar. -2 April 2009, vol. 3, pp. 433–435, 2009.
H. Hongjiang and W. Shuangyou, “The application of ARM and ZigBee technology wireless networks in monitoring mine safety system,” IEEE International Colloquium on Computing, Communication, Control, and Management (ISECS 2008), 3-4 Aug. 2008, Guangzhou, pp. 430–433, 2008.
X. Liu, J. S. Huang and Z. Chen, “The research of ranging with timing over packet network for the mine safety application,” Journal of Networks, vol. 7, no. 7, pp. 1054–1062, Jul. 2012.
R. S. Nutter, “Hazard evaluation methodology for computer-controlled mine monitoring/control systems,” IEEE Trans. on Industry Applications, vol. IA-19, no. 3, pp. 445-449, May/June 1983.
R. S. Nutter, “A distributed microprocessor monitoring and control system for coal mines,” in Proc. 4th WVU Conf. on Coal Mine Electrotechnology, Aug. 2-4, 1978.
R. S. Nutter and M. D. Aldridge, “Status of mine monitoring and communications,” IEEE Trans. on Industry Applications, vol. 24, no. 5, pp. 820-826, Sep./Oct. 1998.
A. D. Kock and J. W. Oberholzer, “The development and application of electronic technology to increase health, safety, and productivity in the South African coal mining industry,” IEEE Trans. on Industry Applications, vol. 33, no. 1, pp. 100-105, Jan/Feb. 1997.
P. Misra, S. Kanhere, D. Ostry and S. Jha, “Safety assurance and rescue communication systems in high-stress environments: a mining case study,” IEEE Communications Magazine, vol. 48, no. 4, pp. 66-73, April 2010.
A. E. Forooshani, S. Bashir, D. G. Michelson and S. Noghanian, “A survey of wireless communications and propagation modelling in underground mines,” IEEE Communications Surveys and Tutorials, vol. 15, no. 4, pp. 1524-1545, Nov. 2013.
C. P. Kruger and G. P. Hancke, “Implementing the Internet of Things vision in industrial wireless sensor networks,” IEEE Int. Conf. on Industrial Informatics, pp. 627-632, July 2014.
A. Kumar and G. P. Hancke, “Energy efficient environment monitoring system based on the IEEE 802.15.4 standard for low cost requirements”, IEEE Sensors Journal, vol. 14, no. 8, pp. 2557-2566, Aug. 2014.
D. M. Han and J. H. Lim, “Smart home energy management system using IEEE 802.15.4 and ZigBee,” IEEE Trans. on Consumer Electronics, vol. 56, no. 3, pp. 1403-1410, Aug. 2010.
C. P. Kruger and G. P. Hancke, “Benchmarking Internet Of Things devices,” IEEE Int. Conf. on Industrial Informatics, pp. 611-616, July 2014.
K. Gill, S. H. Yang, F. Yao and X. Lu, “A ZigBee-based home automation system,” IEEE Trans. on Consumer Electronics, vol. 55, no. 2, pp. 422-430, May 2009.
Refbacks
- There are currently no refbacks.
Copyright © 2012 - 2023, All rights reserved.| ijitr.com
International Journal of Innovative Technology and Research is licensed under a Creative Commons Attribution 3.0 Unported License.Based on a work at IJITR , Permissions beyond the scope of this license may be available at http://creativecommons.org/licenses/by/3.0/deed.en_GB.